1. Why are Steel Structure Fabrication Standards a “Vital” Factor for a Project?
Steel structure is considered the “backbone” of every modern construction project. Adhering to fabrication standards not only ensures durability and safety but also determines the reputation of the business.
Hai Long Construction JSC is proud to be a company with 26 years of experience in the field of steel structure – always putting technical standards first, committed to providing optimal steel structure solutions for every project.
2. International and domestic standards for steel materials
Steel material is the core factor determining the quality, safety, and lifespan of every steel structure project. To ensure optimal performance, International and Vietnamese standards specify in detail the chemical composition, mechanical properties, and applicability of each type of steel, suitable for the specific characteristics of each project.
- ASTM A36, ASTM A572, ASTM A992 (USA): Specify tensile strength (minimum 400-550 MPa), yield strength (250-450 MPa), ductility, and weldability, suitable for beams, columns, factory frames, and bridges.
- JIS G3101 (SS400), JIS G3106 (SM490) (Japan): High strength, good impact resistance, suitable for structures subject to dynamic loads such as factories and seaports.
- EN 10025-2 (S235, S355), EN 10210 (Europe): Strict standards for durability and corrosion resistance, suitable for projects requiring high precision such as high-rise buildings and airports.
- TCVN 1651, TCVN 197 (Vietnam): Regulations on hot-rolled construction steel, ensuring uniformity and suitability for tropical humid climate conditions.
Why must material standards be followed?
- Ensuring accurate load calculation: Standardized steel helps the structure bear loads according to design, preventing deformation and cracking.
- Increasing project lifespan: High-quality steel provides excellent corrosion resistance, reducing maintenance costs.
- Absolute safety: Non-standard materials can cause structural collapse, threatening human life.
3. Steel Structure Design Standards
Steel structure design is the foundation that determines the safety, economic efficiency, and lifespan of a project. The international and Vietnamese design standards below ensure that the structure meets technical requirements, load capacities, and environmental conditions.
Vietnamese Standards (TCVN 5575:2012 & TCVN 5575:2024)
- Scope of application: Steel structure design for civil and industrial projects. Not applicable to bridges, roads, or hydraulic structures.
- Highlights:
- Regulations on load calculation methods, stress analysis, and structural stability checks.
- Requirements for material safety factors (γM), load factors (γQ), and working condition factors (γC).
- TCVN 5575:2024 (to be issued) adds component classification based on stress states (elastic, elasto-plastic, plastic), supporting the design of complex structures such as high-rise buildings and airports.
American Standards (AISC 360-22)
- Scope of application: Design of industrial steel structures, high-rise buildings, and bridges in the US market and international projects.
- Highlights:
- Combines ASD (Allowable Stress Design) and LRFD (Load and Resistance Factor Design) to optimize durability and economy.
- Detailed regulations on materials, bolted/welded connections, and weld inspection using ultrasonic and X-ray testing.
- The AISC 360-22 version updates requirements for Protected Zones in seismic-resistant structures.
European Standards (Eurocode 3 – EN 1993)
- Scope of application: Design of steel structures for civil, industrial, and bridge/road projects in the EU and multinational projects.
- Highlights:
- Consists of 20 detailed parts: EN 1993-1-1 (general design), EN 1993-1-8 (connections), EN 1993-2 (steel bridges)…
- Applies the limit state method, calculating durability, stability, and deflection according to boundary conditions.
- Strict requirements for stainless steel materials (EN 10088) and corrosion resistance in marine environments.
Comparison and selection of appropriate standards
| Criteria | TCVN 5575 | AISC 360 | Eurocode 3 |
|---|---|---|---|
| Scope | Civil, industrial | US/International projects | EU/Global |
| Calculation method | Safety factor | ASD & LRFD | Limit state |
| Advantages | Suitable for Vietnam's climate | Flexible, updated | Comprehensive, detailed |
| Typical projects | Factory buildings, overpasses | Industrial factory | Bridges, high-rise buildings |
4. Leading International Standards in Steel Structure Fabrication
ASTM Standards (USA)
ASTM A6/A6M: This specifies requirements for hot-rolled steel materials, ensuring appropriate chemical composition and mechanical properties.
AWS D1.1: This is the standard for steel structure welding, covering welding methods and inspection of welds using ultrasonic and magnetic particle testing.
EN 1090 Standards (Europe)
EN 1090-1: Requirements for conformity assessment (CE Marking) for steel components.
EN 1090-2: Technical requirements for fabrication, erection, and quality control.
ISO 3834 Standard
Comprehensive quality management for welding, from materials to welder training.
5. Vietnamese Standards (TCVN) in Steel Structure Fabrication
TCVN 5575:2024: Regulations on steel structure design, load analysis, and safety factors.
TCXDVN 170:2007: Technical requirements from fabrication and assembly to acceptance.
TCVN 7506:2011 (ISO 3834): Quality management system for welding, from material preparation to final acceptance.
HAI LONG CONSTRUCTION IS A REPUTABLE STEEL STRUCTURE MANUFACTURER
Choosing the right steel structure fabrication partner is the deciding factor for the success of every construction project. In a market that increasingly demands high quality, schedule adherence, and safety, Hai Long Steel Structure is proud to be a leading brand trusted by many major domestic and international investors:
- A team of experienced engineers, architects, and experts, knowledgeable in the design and construction of factory buildings and warehouses according to international standards.
- Diverse construction capabilities, meeting all project scales and requirements, from simple to complex factory buildings.
- Equipped with modern machinery and equipment, three steel structure factories with a capacity of nearly 50,000 tons/year ensure fast, accurate, and safe construction.
- Professional construction process, strictly managed.
Are you looking for a reputable and professional steel structure manufacturing and erection contractor? Contact Hai Long Construction for free consultation and quotation:
- HAI LONG CONSTRUCTION JSC – MEMBER OF TAIYO GROUP
- Address: Taiyo Building, 97 Bach Dang, Thuong Ly Ward, Hong Bang District, Hai Phong City, Vietnam.
- Hotline: 084 6625 888
- Email: info@hailongjsc.vn












